5 Ways to Fix your MacBook Air M2 when It’s Not Turning On

Most users might experience a devastating experience when their Macbook Air doesn’t turn on. Such problems seem to affect every device nowadays, including the Macbook Air.

Consider the scenario where you cannot fulfill a business or need that relies on your Macbook due to the circumstances mentioned. 

If you recently opened your Macbook Air and found out it wasn’t turning on, feel free to read this entire article.

These contents should be helpful to Macbook Air users who are just getting a black screen without indicating that their device is working. 

Why won’t my MacBook Air M2 turn on?

Many reasons might occur to your Macbook Air, which is why it doesn’t turn on. Some of the possible reasons are:

  • Maybe your battery is dead or swollen
  • Your MacBook air M2 is overheated
  • It might have some hardware issue

Before heading to the solutions, check your battery whether it is charged or not. If it is not, connect your charger and try to turn it on after a few minutes.

If this does not work, then go for the next solutions below.

How do I fix my MacBook Air M2 if it won’t turn on?

1. Perform a power cycle

If your MacBook gets stuck in the Sleep state, it will not respond to normal wake-up signals such as opening the lid, pressing the power button, or clicking the touchpad.

It is necessary to perform a power cycle to bring the MacBook back to the Off state. For 10 seconds, hold down the power button and release it.

Now that the Mac is off, you can turn it back on. If your Mac has a spinning hard drive, you may hear a squeak when power is cut off. You won’t hear anything if your MacBook has an SSD drive.

Your Mac is now in the Off state. Press the Power button to check if your Mac can be turned on.

The next step should be taken if a power cycle does not fix the problem.

2. Check for a faulty screen

One of the reasons your MacBook Air M2 might not turn on is a problem with the connection between the display and the logic board.

To see if this is the case, you can try to connect an external monitor or display to your MacBook Air.

If you see images on an external monitor, it means that your MacBook Air’s display is not working, and you will need to get it repaired or replaced.

While connecting the external screen, if you face any issues regarding HDMI connectivity, then you check this guide to fix HDMI connection issues.

3. Check for a swollen battery

A swollen or flat battery is one of the most common reasons a MacBook Air M2 won’t turn on. Open the back lid of your MacBook Air and check the battery to see if it is swollen or not. If it is, then you will need to get a new battery.

4. Reset the SMC

  1. Turn off your Macbook by pressing the Power button for 10 seconds if it is in sleep mode.
  2. Then, hold the Shift + Control and Option keys on the left side of the keyboard, then press the power button simultaneously. Hold all of these four keys down for about 10 seconds.
  3. Then, press the Power button again to check whether the issue is resolved or not.

You may think of the SMC as a very little computer that runs on a very small operating system, and there is a possibility that the software will malfunction sometimes.

 In the event that your MacBook has this issue, you will need to reset the SMC, and it will be resolved.

5. Check for a hardware issue

If you have tried all of the steps above and your MacBook Air M2 still won’t turn on, it is likely that there is a hardware issue with your device.

You should take your MacBook Air to an authorized Apple service provider or Apple Store to get it checked out.

How do you turn on a Mac without a Power button?

When you want to turn on a Macbook Air without having to use the Power button, you can use a shortcut that dispenses with the use of the Power button.

You will then need to hold down Control, Option, and DELETE for a few seconds until your Macbook Air restarts.

Hopefully, this article helped you figure out how to turn on your MacBook Air without using the Power button and some solutions to the problem if your MacBook Air M2 won’t turn on.

If you have any other questions, feel free to leave a comment below.

Leave a Comment